Acrosser AR-B9612 Manuel d'utilisateur télécharger pdf (Page 18)

AR-B9612 User’s Guide

2-13

2.9 FLASH DISK

The AR-B9612 provides three 32-pin JEDEC DIP sockets may

be populated with up to 1.5MB FLASH. It is ideal for diskless

system, high reliability and/or high speed access applications,

controller for industrial or line test instruments, etc.

2.9.1 Configuration

FLASH function enables you to use 5V FLASH, allowing you to

directly program the ROM disk without having to purchase any

additional programming equipment to write or erase data. If

small page (less or equal 512 bytes per page) 5V FLASHs are

used, you can format FLASH disk and copy files onto FLASH

disk just like using floppy disk. If you would like to update 1

or more files to FLASH disk, you just copy these files onto

FLASH disk, you don’t need to re -program the FLASH disk.

If you are not going to use the solid state disk (SSD), you can

use BIOS setup program to disable the SSD BIOS. The

AR-B9612 will not occupy any memory address if the SSD BIOS

is disabled.

If you are going to install the EMM386.EXE driver, please use

the [X] option to prevent EMM386.EXE from using the particular

range of segment address as an EMS page which is used by

AR-B9612. For example, write a statement in the

CONFIG.SYS file as follow: (If the memory configuration of

AR-B9612 is C800:0)

DEVICE=C:\DOS\EMM386.EXE X=C800-CBFF

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 46 47

Pas de commentaire

Acrosser AR-B9612 Manuel d'utilisateur Page 18