Acrosser AR-B1551 Manuel d'utilisateur télécharger pdf (Page 37)

AR-B1551 User’s Guide

Multiple Monitor Support

This is to determine the highest priority that the monitor supports. <PCI First> is the default setting. The other two

choices are <No Onboard> and <M/B First>.

5.8 PASSWORD SETTING

This BIOS Setup has an optional password feature. The system can be configured so that all users must enter a

password every time the system boots or when BIOS Setup is executed.

5.8.1 Setting Password

Select the appropriate password icon from the Security section of the BIOS Setup main menu. Enter the password

and press [Enter]. The screen does not display the characters entered. After the new password is entered, retype

the new password as prompted and press [Enter].

If the password confirmation is incorrect, an error message appears. If the new password is entered without error,

press [Esc] to return to the BIOS Main Menu. The password is stored in CMOS RAM after BIOS is completed.

The next time the system boots, the prompt for the password function is present and is enabled.

Enter new supervisor password:

5.8.2 Password Checking

The password check option is enabled in Advanced Setup by choosing either Always (the password prompt

appears every time the system is powered on) or Setup (the password prompt appears only when BIOS is run).

The password is stored in CMOS RAM. User can enter a password by typing with the keyboard. Enter a 1-6

character password. The password does not appear on the screen when typed. Make sure you write it down.

5.9 IDE HDD AUTO DETECTION

This option detects the parameters of an IDE hard disk drive, and automatically enters them into the Standard

CMOS Setup screen.

5.10 BIOS EXIT

This section is used to exit the BIOS main menu in two types of situation. After making your changes, you can

either save them or exit the BIOS menu and without saving the new values.

5.10.1 Save & Exit Setup

This item set in the <Standard CMOS Setup>, <BIOS Features Setup>, <Chipset Features Setup>, <Power

Management Setup>, <Integrated Peripherals> and the new password (if it has been changed) will be stored in the

CMOS. The CMOS checksum is calculated and written into the CMOS.

As you select this function, the following message will appear at the center of the screen to assist you in saving

data to CMOS and Exit the Setup.

Save current settings and exit (Y/N) ?

5.10.2 Exit Without Saving

When you select this option, the following message will appear at the center of the screen to help to abandon all

Data and Exit Setup.

Quit without saving (Y/N) ?

Windows Installation Notice:

1. The proper way to setup the Windows system is to copy all the drivers needed to your hard disk or CD-ROM and to

execute them from the related devices.

2. Please refer to BIOS setup section in this manual for booting from CD-ROM

3. If you find any difficulty in the operating systems installation,

please contact our technical support for further assistance.

1 2 ... 32 33 34 35 36 37

Commentaires sur ces manuels

Pas de commentaire

Acrosser AR-B1551 Manuel d'utilisateur Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Acrosser AR-B1551