Acrosser AR-B1551 Manuel d'utilisateur télécharger pdf (Page 36)

AR-B1551 User’s Guide

5.7 INTEGRATED PERIPHERALS

This section is designed to configure the peripheral features.

ROM PCI/ISA BIOS (2A434AVF)

INTEGRATED PERIPHERALS

AWARD SOFTWARE, INC.

Multiple Monitor Support

Video Memory Size

: No Onboard

: 2.5M

Esc: Quit

F1: Help

F5: Old Values

↑↓→←: Select Item

PU/PD/+/-: Modify

(Shift) F2: Color

IDE HDD Block Mode

Primary IDE Channel

Master Drive PIO Mode

Slave Drive PIO Mode

IDE Primary Master UDMA

IDE Primary Slave UDMA

KBC input clock

Onboard Serial Port 1

Onboard Serial Port 2

Onboard IR Controller

Onboard Parallel Port

Parallel Port Mode

: Enabled

: Auto

: Disabled

: 8 MHz

: 3F8/IRQ4

: 2F8/IRQ3

: Disabled

378/IRQ7

SPP

F6: Load BIOS Defaults

F7: Load Setup Defaults

Integrated Peripherals

IDE HDD Block Mode

This option allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk

drive (HDD).

Enabled IDE controller uses block mode.

Disabled IDE controller uses standard mode.

IDE PIO

IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave

relationship, which is determined by the cabling configuration used to attach them to the controller. Your system

supports one IDE controller – a primary and a secondary – so you have the ability to install up to four separate

hard disks.

PIO means Programmed Input/Output. Rather than have the BIOS issue a series of commands to affect a transfer

to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the

CPU perform the complete task by themselves. This is simpler and more efficient (and faster). Your system

supports five modes, numbered from 0 to 4, which primarily differ in timing. When Auto is selected, the BIOS will

select the best available mode.

KBC input clock

This item it to chose the input clock of Keyboard Controller

OnBoard Serial Port 1 & 2

These options are used to select the port address of the on-board serial port A. The options are 3F8H, 2F8H,

3E8H, 2E8H, Auto and Disable. Port 1 is COM A, Port 2 is Com D and so on. Port four can be set to be IrDA

(Choose Auto) if the IrDA device has been connected.

OnBoard Parallel Port

This option is used to select the port address of the on-board parallel port. The options are 378H, 278H, 3BCH,

and Disabled.

Parallel Port Mode

This option specifies the parallel port Mode. The settings are Printer or Extended (Bi-direction).

1 2 ... 31 32 33 34 35 36 37

Commentaires sur ces manuels

Pas de commentaire

Acrosser AR-B1551 Manuel d'utilisateur Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Acrosser AR-B1551