Acrosser AR-R5700 Manuel d'utilisateur

1 AR-R5700 Serial Installation Guide

102. Remove the dummy bracket (default for AR-R5700) out from the PCI-E slot via unlock the screws on the front-side of chassis, as shown in Fig-08.

112-4 Installing CPU and Heatsink Module The following are step-by-step instructions for CPU and Heatsink Module. 1. Take out the air-flow tunnel of

122. Take out the Heatsink Module via loosing the screws of the Heatsink Module, as Fig-12 Fig-12 Take out the Heatsink Module Step-2 Ste

13 Appendix CPU in support Intel Proc No Clock Speed Cache FSB Note Core 2 Duo processor E8400 3G 6M 1333 Core 2 Duo processor E830

2Contents 1 Introduction of AR-R5700serial………… 03 1-1 Discrimination……………………………… 03 1-2 Packing List 03 2 Procedure of Assembly/Disassembly…………………

31. Introduction of AR-R5700 Series AR-R5700 series is a 1U height, rack-mounted system product. It is designed mainly for networking applications

41.2 Packing List Description Q’ty AR-R5700serial 1 Power Core 1 CD 1 KB/MS Cable 1 Mounting Bracket (+screw) 2 Console cable 1 SATA Cable

52. Procedure of Assembly/Disassembly 2-1 Installing the 2.5”/3.5”Hard Disk Drive (HDD) The following are step-by-step installation. 1. Remove th

65. Connect the SATA cable to the SATA connector of HDD, 6. Place the HDD module (HDD+HDD bracket) back to the case 7. Fix the HDD bracket to the

78. Tighten the two screw-nuts on the top edge of AR-R5700, as Fig-04. Fig-04 Lock the top cover

82-2 Installing CF card The following are step-by-step installation. 1. Unlock the two screw-nuts on top-edge to remove the top-cover out from AR-

92-3 Installing Extension Module Options (PCI-E) The following are step-by-step installation for PCI-E Module (LAN expansion module). 1. Unlock the